Replacement spring eye bushing only for Dexter 10-15k axlesInsert into eye of leaf spring to correct sloppy suspension and absorb road shock.- Bushing Construction: Outer rubber with inner steel sleeve.- Bushing ID: 1"- Bushing OD: 2"- Length: 3-1/8"- Manufacturer: Mullins- Made in the USA- Used on Dexter 3" wide slipper springs- Not Used on Dexter 9-10k general duty axles- Used on the Heavy Duty 10KHD, 12k and 15k Dexter axles
Configured as center hanger
Suspends equalizer on tandem- or triple-axle trailers
Designed for trailers with 10K HD, 12k, 15k Dexter axles
Fits 3" wide slipper springs
Works with 1-1/8" diameter bolt (sold separately)
Slipper Springs - 3 Inch
24-3/4 Inch Long
Tandem Axle
Dexter Axle
Equalizer attaches to the middle hanger of you suspension system and connects slipper springs on your tandem or triple-axle trailer. Fits 3" wide springs with 1" diameter eye.
Connects slipper springs on dual- or triple-axle trailers
Slip arched end of front spring into equalizer so that it rests on keeper bolt (sold separately)
Attach rear-most spring with shackle bolt (sold separately) through the eye
Suspends from center hanger (sold separately)
Transfers load and sudden impacts from one axle to another by permitting movement between the axles Distributes weight evenly
Results in smooth ride for trailer
Rubber bushing are pressed into center holes allowing less noise and vibration into suspension
Strong steel construction ensures durability
Specs:
Fits: tandem- or triple-axle trailer with 3" wide slipper springs
18-1/2" long equalizer connects slipper springs on tandem or triple-axle trailers and transfers impact between the axles to ensure that the load is evenly distributed. Designed for use with 10,000 lb Dexter axles.
Details/Specs:
Works with 2-1/2" wide slipper leaf springs
42-1/4" axle spacing
Center Bolt Hole Diameter: 1"
Spring Bolt Hole Diameter: 3/4"
Dimensions: 18-1/2" L x 3" W x 5-1/4" H
For left or right side
Bushing included
Manufacturer: DexterPart No: 13-140-3
24-3/4" long equalizer connects slipper springs on tandem or triple-axle trailers and transfers impact between the axles to ensure that the load is evenly distributed. Designed for use with 10,000 lb Dexter axles.
Details/Specs:
Works with 2-1/2" wide slipper leaf springs
48-1/2" axle spacing
Center Bolt Hole Diameter: 1"
Spring Bolt Hole Diameter: 3/4"
Dimensions: 24-3/4" L x 3" W x 5-1/4" H
For left or right side
Bushing included
Manufacturer: DexterPart No: 13-141-3
18-1/2" long equalizer connects slipper springs on tandem or triple-axle trailers and transfers impact between the axles to ensure that the load is evenly distributed. Designed for use with 10,000 lb HD - 15,000 lb Dexter axles.
Details/Specs:
Works with 3" wide slipper leaf springs
42-1/4" axle spacing
Dimensions: 18-1/2" L x 3" W x 6" H
For left or right side
Bushing included
Manufacturer: DexterPart No: 13-108-3
14-1/4" long equalizer connects slipper springs on tandem or triple-axle trailers and transfers impact between the axles to ensure that the load is evenly distributed. Designed for use with 10,000 lb HD - 15,000 lb Dexter axles.
Details/Specs:
Works with 3" wide slipper leaf springs
38" axle spacing
Center Bolt Hole Diameter: 1-1/8"
Spring Bolt Hole Diameter: 1"
Dimensions: 14-1/4" L x 3-5/8" W x 6" H
For left or right side
Bushing included
Manufacturer: DexterPart No: 13-107-7vv
Configured as front hanger
Provides attachment point for leaf springHanger suspends spring from trailer frame
Designed for trailers with 10k HD, 12k, 15k Dexter axles
Fits 3" wide slipper springs
Works with 1" diameter bolt (sold separately)
Provides attachment point for leaf springHanger suspends spring from trailer frame by providing a resting place for the slipper end of the spring
Designed for trailers with 10K HD, 12K, 15K Dexter axles
Fits 3" wide slipper spring
This 2-1/2" wide 5-leaf spring is designed for 10K general duty slipper spring suspension systems.
Details/Specs:
Number of Leafs: 5
Capacity: 5,000 lbs
Free Length: 30-1/2"
Spring Width: 2-1/4"
Free Arch: 4"
Bushing ID: 3/4"
Part No: 72-80
This 3" wide 5-leaf spring is designed for 10K heavy duty slipper spring suspension systems.
Details/Specs:
Capacity: 5,000 lbs
Length: 30-1/2"
Spring Width: 3"
Free Arch: 3-15/16"
Part No: 72-43
This 3" wide 6-leaf spring is designed for 12K slipper spring suspension systems.
Details/Specs:
Capacity: 6,000 lbs
Length: 30-1/2"
Spring Width: 3"
Free Arch: 3-15/16"
Manufacturer: DexterPart No: 072-044-01
