This is the newest style dump door hold back used on PJ Dump trailers smaller than DD and DS models built after November 2012. It utilizes a spring loaded locking pin and ramp plate welded to the upper hinges of the rear door.
Note: Specify left or right side.
Replacement dump trailer cam door latch kit used on PJ Trailer models D7, D9, DL, and DJ.
Details/Specs:
Construction: Steel
Color: No paint finish
Handle is formed steel with a riveted swivel
Handle Length: 13-1/2"
Kit contains:
180105 x 1 Keeper Bottom Cam Door Latch-Dump
180106 x 1 Keeper Top Cam Door Latch-Dump
180107 x 1 Lug Bottom Cam Door Latch-Dump
180108 x 1 Lug Top Cam Door Latch-Dump
180109 x 1 Handle Cam Door Latch-Dump
180110 x 1 Hasp Cam Door Latch-Dump Door
Trailer floor screws used to secure wood deck boards to trailer frame. Counter sunk head for flush mount.
Details/Specs:
1/4" diameter, 28 TPI
2 1/4" length
Thread cutting tip, Type F
Requires a 7/32" pre-drilled hole
Black phosphate finish
Sold in 1 lb. (~30 screws) & 4 lb. (~120 screws) boxes
Note: Uses a T30 torx driver not included
3/4″ coarse-thread bolt holds tension between the coupler outer housing and coupler insert of the gooseneck coupler. Fits either round or square couplers. Includes jam nut.
Half pivot hinge for dumps/tilts. This is the hinge that is used on most PJ Trailer Dumps and Tilts.
Details/Specs:
Includes grease fitting
Pin is welded in
Sold unpainted, This may have some surface rust
Dimensions: 5" L x 3" W x 3" H
Half pivot hinge for Lonestar full tilt trailers
Includes grease fitting
Pin is welded in
Sold unpainted, This may have some surface rust
Dimensions 5" x 4" x 4.5"
16″ Strap hinge for trailer and RV doors. Sharply bent hinge pivot point for extra 5/16″ corner clearance and 1/2″ offset gap for thick door seals. 270° action when placed on trailer corner.
Strap mounting holes on 6.50″ CentersHinge mounting holes on 3.25″ Centers
For use with most stud-mounted tail lights and stop, turn, tail with license light. Zinc-plated steel. Hardware not included.
Manufacturer: PetersonPart No: B428-09
Made from steel grating for increased traction
12.5" wide allowing both feet to be on the step at once for improved stability & safety
Excellent grip in mud & snow
Self-cleaning
Premium-grade quick links for chain, rope & cable connections; threaded nut closure for added security. Grade 316 stainless steel has superior corrosion resistance and strength over grade 304. Excellent choice for boating, sailing, marine and other harsh-condition applications.
The Rampgate Keeper is a sturdy tab designed to be welded to the back of a trailer, providing a secure mounting point for pivot pins on trailer gates. Specifically crafted to fit a 1" rod, this keeper ensures stability and durability for trailer gates and ramps. It’s part of a four-piece mounting kit, ideal for enhancing trailer functionality and safety.
Features
Fits 1" Rod: Designed for compatibility with standard 1" diameter rods.
Durable Weld-On Design: Easily welds to the trailer's back frame for a secure hold.
Flat 2"x 3/8" L x 2" W x 3/8" D
This recessed bumper is used as feet on the bottom of products, on the side as protectors and on the top as absorbers. They are used to prevent metal-to-metal or surface-to-surface contact. Common uses include counter-top appliances, door stops, cart edges, furniture feet, drawer stops and thousands of places where they are installed with fasteners to protect metal and wood.
Details/Specs:
Outside Diameter: 2 1/2″
Height: 1″
Recess Depth: 1/2″
Recess Width: 1 1/8″
Hole Diameter: 3/8″
