Electro/Hydraulic brake actuator provides 1000 psi of pressure for 1-3 axles equipped with drum brakes. Sealed housing provides a weather tight seal. Large reservoir capacity reduces the number of fill-ups required which reduces the bleed time as well as the risk of running the reservoir dry during brake bleeding. Aluminum enclosure provides anti-corrosive protection and prevents the elements from affecting reliability while the finned housing design dissipates heat efficiently. Proportional pressure output to the brakes corresponds to voltage output of the brake controller for smooth, reliable braking.
Details/Specs:
Provides 1000 PSI of pressure
For single, tandem, and triple axle trailers with drum brakes
Dimensions: 10.5" L x 5.5" W x 7" H
12V DC operation requires 4-wire hookup & at least 9 amp break-away kit
Uses DOT 3 or 4 brake fluid, holds 40 cubic inches (0.7 qts)
Meets or exceeds all DOT regulations and federal braking requirements
Manufacturer: DexterPart No: K71-650-00
Electro/Hydraulic brake actuator provides 1600 psi of pressure for 1-3 axles equipped with disc brakes. Sealed housing provides a weather tight seal. Large reservoir capacity reduces the number of fill-ups required which reduces the bleed time as well as the risk of running the reservoir dry during brake bleeding. Aluminum enclosure provides anti-corrosive protection and prevents the elements from affecting reliability while the finned housing design dissipates heat efficiently. Proportional pressure output to the brakes corresponds to voltage output of the brake controller for smooth, reliable braking.
Details/Specs:
Provides 1600 PSI of pressure
For single, tandem, and triple axle trailers with disc brakes
Dimensions: 10.5" L x 5.5" W x 7" H
Distance between mounting holes (center to center):
2-1/2" Between holes on same side of bracket
9-13/16" Between holes on opposite sides of bracket
Mounting hole diameter: 1/4"
Hydraulic port size: 3/16"
12V DC operation requires 4-wire hookup & at least 9 amp break-away kit
Uses DOT 3 or 4 brake fluid, holds 40 cubic inches (0.7 qts)
Meets or exceeds all DOT regulations and federal braking requirements
Manufacturer: DexterPart No: K71-651-00
12V DC, 15 GPM heavy duty, cast-iron, rotary vane fuel transfer pump. Designed for gasoline, diesel, biodiesel up to B20, E15, kerosene and mineral spirits. Includes pump, ¾” manual nozzle, ¾” x 12” hose with static ground wire, 18’ battery cable, and 20”-34” steel telescoping suction pipe. UL/cUL, ATEX, CE motor. Two-year warranty. Made in USA.
Details/Specs:
Up to 15 GPM
1/4 HP motor
UL/cUL listed motor
Compatible with Diesel, Gasoline, Kerosene, E15, Biodiesel up to B20
2 year warranty
2 in. threaded base for tank mounting
Heavy duty cast iron construction
Cast bronze rotor with bronze rotary vanes
Built-in strainer
12 ft. hose with static wire
Replaces FR1210C
Manufacturer: Fill-RitePart No: FR1210G
Electric-hydraulic brake actuator lets you use an electric brake controller from inside your vehicle to adjust and control your trailer's hydraulic brakes. Gives you greater control over your trailer's brakes than that provided by standard hydraulic actuators. Sealed, extruded, anodized aluminum housing (not cast or plastic) to prevent corrosion.
Details/Specs:
Dimensions: 12" L x 3" W x 7 1/4" H
Trailer mounted 12 V DC operation
Requires in-cab controller
Provides 1000 PSI for any trailer configuration with drum brakes and 1-3 axles
Uses DOT 3 or DOT 4 brake fluid
Meets all DOT regulations & complies with CFR-393 braking requirements
2 year warranty from date of purchase
Manufacturer: HydrastarPart No: 21-350
Electric-hydraulic brake actuator lets you use an electric brake controller from inside your vehicle to adjust and control your trailer's hydraulic brakes. Gives you greater control over your trailer's brakes than that provided by standard hydraulic actuators. Sealed, extruded, anodized aluminum housing (not cast or plastic) to prevent corrosion.
Details/Specs:
Dimensions 11.8inch long x 3inch wide x 7.3inch high
Trailer mounted 12 V DC operation
Requires in-cab controller
Provides 1600 PSI for any trailer configuration with disk brakes and 1-3 axles
Uses DOT 3 or DOT 4 brake fluid
Meets all DOT regulations & complies with CFR-393 braking requirements
2 year warranty from date of purchase
Manufacturer: Hydrastar
Manufacturer Part Number: HBA-16
Our Part No: 21-352-1
The KTI 3/4" Plastic Plug with an NPT fitting and gasket is designed to securely seal hydraulic reservoirs, ensuring leak-free performance. Ideal for KTI hydraulic systems, this plug prevents debris and contaminants from entering, maintaining the longevity and efficiency of your hydraulic setup.
Features
3/4" NPT Fitting: Ensures a secure, leak-resistant fit for hydraulic reservoirs.
Durable Plastic Construction: Lightweight yet sturdy to withstand demanding environments.
Includes Gasket: Provides an added seal for optimal performance.
Why Choose This Plug?
Easy Installation: Designed for a quick, hassle-free setup.
Reliable Sealing: Keeps hydraulic systems free from contaminants.
Elevate your hydraulic operations with the KTI 12V Double Action Hydraulic Pump, featuring a 3-quart plastic reservoir. Ideal for dump trailers, lift gates, and tilts, this pump offers efficient power up/down functionality. Designed for reliability, it ensures smooth performance and easy installation, making it an excellent choice for demanding tasks.
Perfect replacement pump for 12VDC remotely controlled hydraulic system and excellent for dump trailers - lift gates.
This pump will work on all hydraulic dumps, tilts, jacks, and dovetails that are made by PJ, with the exception of tandem dual dump (TDD) and tandem dual tilt (TD) models.
Details
3 Quart Plastic Offset Reservoir
12V DC, (2) Terminal, Electric Motor
12V DC Heavy duty plastic start solenoid switch /100 amp
Cartridge relief valve, Adjustable set
3,200 PSI max. relief setting for increased lifting power on "A" port
1,100 PSI max. relief setting on "B" port
2.0 GPM.
SAE #6 port, horizontal mount
Hand held remote with 15' removable cord and start solenoid
Features
Double Acting Operation: Power up and down, enhancing versatility for various hydraulic applications.
Compact 3-Quart Reservoir: Offset design, ideal for space-saving configurations.
Heavy-Duty 12V Motor: Durable and efficient, equipped with a 100-amp start solenoid.
User-Friendly Remote: 15' corded handheld remote for effortless operation.
Why Choose This Pump?
Built Tough: Made to withstand intense use and harsh conditions.
Reliable Performance: High PSI settings for efficient power delivery.
Versatile Application: Suitable for various trailer and lift systems.
Manufacturer: KTI Hydraulics
Maximize the efficiency of your hydraulic system with the 12V Double Acting Hydraulic Pump (6 Quart). Engineered for robust performance and reliability, this pump is perfect for a wide range of applications, from dump trailers to lift gates. With a durable, compact design and impressive hydraulic power, you can trust this unit to handle heavy loads effortlessly.
This pump will work on all hydraulic dumps, tilts, jacks, and dovetails that are made by PJ. Since 2014 the only trailers these are used in are the TDD and the TD models.
Details/Specs:
6 Quart Plastic Offset Reservoir
12V DC, (2) Terminal, Electric Motor
12V DC Heavy duty plastic start solenoid switch /100 amp
Cartridge relief valve, Adjustable set
3,200 PSI max. relief setting for increased lifting power on "A" port
1,100 PSI max. relief setting on "B" port
2.0 GPM
SAE #6 port, horizontal mount
Length 21.5" x Height 8" x Width 8"
Hand held remote with 15' removable cord and start solenoid
Manufacturer: KTI Hydraulics
Features
Double Acting Functionality: Offers precise control for both lifting and lowering operations, making it highly versatile for different hydraulic needs.
High-Capacity 6 Qt Reservoir: Ensures ample hydraulic fluid storage, allowing for sustained operation without frequent refills.
Efficient 12V Motor: Delivers dependable power output, optimized for consistent performance in demanding environments.
Durable Construction: Built with heavy-duty materials to withstand harsh conditions and extended use, reducing the need for frequent maintenance.
Easy to Install: Comes pre-wired and pre-assembled for a quick and straightforward setup, minimizing downtime and simplifying the installation process.
Why Choose This Hydraulic Pump?
Unmatched Versatility: Suitable for a variety of applications, including dump beds, car haulers and more, providing great adaptability.
Reliable Performance: High-quality components ensure smooth and reliable operation, critical for high-demand settings.
Cost-Effective Solution: Designed for long-term use, this pump reduces operating costs and minimizes the risk of system failure.
Ensure your KTI hydraulic pump operates smoothly with this Hydraulic Pump Replacement Reservoir, available in both 3-quart and 6-quart sizes. Designed with a universal 4-11/16" round opening and a 4" square bolt hole pattern, these reservoirs provide reliable hydraulic fluid storage for demanding applications. Whether you need compact or extended capacity, these tanks deliver durability and a secure fit for your KTI hydraulic system.
Features
Two Size Options:
3 Quart Reservoir: Compact size with a 6.5in L X 6.75in H X 6.5in W
6 Quart Reservoir: Extended capacity with a 13in L X 7in H, 7in W
Precision Fit: Both sizes feature a 4-11/16" round opening and 4" square bolt hole pattern for secure attachment to KTI pumps.
Durable Construction: Built to withstand rugged conditions and continuous use.
Additional Details
Compatibility: Plug, filler cap, and o-ring are sold separately to customize the setup.
O-Ring Available: Dedicated o-ring for KTI pump reservoir available here.
Why Choose This Reservoir?
Customizable Capacity: Choose between 3 or 6 quarts to match your hydraulic needs.
Reliable & Easy Replacement: Optimized for KTI systems, ensuring simple installation and consistent performance.
Note: O-Ring for KTI Pump Reservoir (Sold Separately)
The KTI Hydraulics Start Solenoid is a heavy-duty, 100 AMP switch designed for reliable starting power in KTI hydraulic pumps. Ideal as a replacement solenoid, it ensures consistent performance and durability for hydraulic applications, from trailers to lift gates. Built to handle high power demands, this solenoid is essential for maintaining optimal pump functionality.
Features
100 AMP Rating: High power capacity for heavy-duty hydraulic needs.
Reliable Start Performance: Ensures dependable start-ups for KTI hydraulic pumps.
Durable Construction: Engineered to withstand rigorous use and environmental conditions.
Why Choose This Solenoid?
Efficient Power Delivery: Provides stable and consistent power for hydraulic pump start-ups.
Easy Installation: Fits seamlessly into KTI hydraulic systems.
2-button remote (down/up) for double acting hydraulic pumps. Compatible with KTI hydraulic pumps January 2015 and newer.
Details/Specs:
Very simple installation
Made of four 14 gauge 600 volt wires inside a molten rubber cord
Features a simple "screw-in and go" design
Water resistant remote dimensions: 4-3/8" x 2-1/2" x 2-1/8"
Magnetic back for sticking to steel
Cord extension sold separately
Manufacturer: KTI HydraulicsPart No: 395-55
The KTI 2-Way Lowering Valve is an essential component for precise control in KTI dual-action hydraulic pumps, specifically designed to work with the square "down" coil. This valve uses a round thumbwheel for easy, manual adjustment, allowing smooth and controlled lowering of hydraulic systems, ideal for applications requiring consistent descent.
Features
2-Way Valve Design: Provides reliable control for lowering functions in dual-action hydraulic pumps.
Round Thumbwheel: Enables manual adjustments for precise operation.
Compatible with KTI Systems: Works seamlessly with the square "down" coil in KTI setups.
Why Choose This Valve?
Enhanced Control: Allows smooth lowering and prevents sudden drops.
Durable & Easy to Use: Built for longevity and designed for straightforward operation.
This 4-Way 2-Position Power "Up" Valve by KTI Hydraulics is a vital component for dual-action hydraulic pumps, specifically paired with the round "up" coil. It provides precise control for lifting operations, ensuring smooth and consistent performance in various hydraulic applications. Ideal for trailers and heavy equipment, this valve is engineered for reliability and ease of use.
Features
4-Way, 2-Position Valve: Designed for efficient "up" functionality in dual-action hydraulic systems.
Hexhead Design: Enables secure installation and easy adjustments.
Compatible with KTI Systems: Works seamlessly with the round "up" coil on KTI hydraulic pumps.
Why Choose This Valve?
Enhanced Lifting Control: Ensures precise and reliable lifting operations.
Durable Construction: Built to withstand rigorous use in demanding environments.
The KTI 4-Wire Adapter is designed for seamless integration with double-acting hydraulic pumps, enabling efficient control and reliable power distribution. Built specifically for KTI hydraulic systems, this adapter ensures smooth operation, making it essential for those looking to enhance the performance of their hydraulic setup.
Features
4-Wire Design: Facilitates efficient power management for double-acting hydraulic pumps.
KTI Compatibility: Engineered to pair perfectly with KTI hydraulic pump systems.
Easy Installation: Quick and straightforward setup for hassle-free use.
Why Choose This Adapter?
Reliable Connection: Ensures stable power flow to your hydraulic pump.
Durable & Dependable: Built to withstand heavy use in demanding applications.
Extend the reach of your hydraulic remote control with this 15' Remote Extension Cord by KTI Hydraulics. Specifically designed for use with 2015 or newer KTI power-up/power-down hydraulic units, this heavy-duty extension cord ensures you can operate your hydraulic system comfortably from a distance. Crafted with four 14-gauge, 600-volt wires within a durable molten rubber cord, it offers long-lasting performance for rugged applications.
Features
15-Foot Length: Provides extra reach for easier control of hydraulic functions.
Heavy-Duty Construction: Four 14-gauge wires encased in a molten rubber cord for maximum durability.
Easy Installation: Screw-in design allows for quick and secure setup.
Compatible with KTI Remotes: Works seamlessly with KTI 2-button remotes (sold separately).
Why Choose This Extension Cord?
Enhanced Flexibility: Perfect for trailers and heavy equipment requiring remote operation from extended distances.
Reliable Performance: Built to withstand demanding use and deliver consistent power.
Note: KTI 2-button Remote (sold separately)
The 10V Round "Up" Coil by KTI Hydraulics is a key component for dual-acting hydraulic pumps, controlling the “up” valve for smooth and reliable lifting. Specifically designed for KTI hydraulic systems, this coil provides dependable functionality, making it essential for trailer and lift operations.
Features
Round Coil Design: Optimized for controlling the "up" valve in KTI dual-action pumps.
High-Performance 10V Operation: Ensures stable and responsive lift control.
Durable Construction: Built to withstand rigorous use in various applications.
Why Choose This Coil?
Efficient Lift Control: Provides smooth lifting for enhanced performance.
Reliable & Easy to Replace: Designed for easy integration with KTI systems.
The 10V Square "Down" Coil by KTI Hydraulics is a crucial component for dual-acting hydraulic pumps, controlling the power “down” valve for smooth and efficient lowering operations. Designed for compatibility with KTI hydraulic systems, this coil ensures reliable performance for various heavy-duty applications, such as trailers and lift gates.
Features
Square Coil Design: Optimized for KTI dual-acting hydraulic pumps.
Precise Valve Control: Manages the “down” function, providing smooth lowering.
High Durability: Built to withstand heavy use in demanding environments.
Easy Install: Featuring spade connectors, this solenoid valve allows for quick and easy installation, saving you time and effort.
Why Choose This Coil?
Reliable Performance: Ensures stable operation and responsive control.
Easy Replacement: Fits seamlessly into compatible KTI hydraulic systems.
he KTI Hydraulics Reservoir Cap with Dipstick is a reliable replacement part designed to fit KTI hydraulic pump reservoirs. This cap includes an integrated dipstick for easy monitoring of hydraulic fluid levels, ensuring optimal pump performance and preventing overfilling. Ideal for maintenance and replacement, this cap is a straightforward solution to keep your hydraulic system functioning smoothly.
Features
Integrated Dipstick: Allows for quick and easy fluid level checks.
Secure Fit: Designed specifically for KTI hydraulic reservoirs for leak-free performance.
Durable Construction: Made to withstand rigorous use and environmental factors.
Why Choose This Cap?
Convenient Maintenance: Streamlines fluid checks and helps prevent hydraulic system issues.
Easy Installation: Fits seamlessly onto KTI reservoirs.
Cut the cords and enjoy the convenience of wireless control with the KTI Hydraulics Wireless Remote. Designed for KTI hydraulic pumps manufactured from January 2015 and newer, this remote offers a 40-foot range and an auto shut-off safety feature after 20 minutes of inactivity. The simple installation process and ability to connect up to four key fobs make it a versatile and user-friendly addition to your hydraulic setup.
Features
40-Foot Range: Operates from up to 40 feet away with no obstructions.
Multi-Key Fob Capability: Program up to four key fobs to a single receiver.
Safety Shut-Off: Automatically turns off after 20 minutes of idle time.
Easy Installation: Includes 15-amp inline fuse and 5/16" terminal rings on power and ground wires.
Why Choose This Wireless Remote?
Enhanced Mobility: Perfect for hands-free operation from a distance.
Dependable Safety Features: Protects the system with a built-in fuse and idle shut-off.
THIS ONLY WORKS WITH A KTI DOUBLE ACTION PUMP|Part No: KWR-003
The KTI Pump Reservoir O-Ring is designed to create a secure, leak-resistant seal between the tank and pump manifold. With a 4-1/2" inner diameter and 1/8" thickness, this O-ring ensures a reliable connection, maintaining hydraulic efficiency and preventing fluid leaks. Ideal for replacements or maintenance, this O-ring is an essential part of any KTI hydraulic system.
Features
Perfect Fit: 4-1/2" inner diameter, 1/8" thick for a secure seal.
Reliable Sealing: Prevents leaks, maintaining hydraulic performance.
Durable Material: Built to withstand hydraulic fluid exposure and environmental factors.
Why Choose This O-Ring?
Easy Replacement: Compatible with KTI hydraulic pump reservoirs for quick installation.
Maintains System Integrity: Ensures a tight seal, preserving pump efficiency.
The KTI Single Action Hydraulic Pump with a 6-quart offset reservoir is perfect for dump trailers, lift gates, tilts, and jacks. This 12V DC power-up/gravity-down pump is designed for efficient lifting and lowering operations, making it an excellent replacement for remotely controlled hydraulic systems. Equipped with a 15' remote cord, it provides convenient and reliable control.
Features
6 Quart Offset Reservoir: Durable plastic construction for high-capacity hydraulic operations.
12V DC Motor: Two-terminal electric motor with a 100-amp start solenoid.
Adjustable Relief Valve: 3,200 PSI max setting on "A" port for increased lifting power.
High Flow Rate: 2.0 GPM for efficient hydraulic performance.
Convenient Remote Control: 15' handheld remote with removable cord.
Specifications
Mount Type: SAE #6 port, horizontal configuration.
Dimensions: Length 21.5" x Height 8" x Width 8".
Why Choose This Pump?
Versatile Applications: Ideal for PJ trailers and compatible with various hydraulic setups.
Dependable Power: Designed for heavy-duty performance and long-lasting use.
Note: Since 2014 the only trailers these are used in are the TDD and the TD models.
This Hydraulic Cylinder is a replacement component specifically designed for hydraulic dovetail trailers from PJ Trailers, compatible with LD, LY, and SY models. Built to handle rigorous use, this cylinder ensures reliable lifting and lowering performance for heavy-duty applications. Engineered for easy installation, it includes multiple mounting points and ports for seamless hydraulic line integration.
Details:
PJ hydraulic dovetail trailer replacement cylinder only
Cylinder size diameter: 5-1/2" round
Shank size diameter: 2"
Shank hole size: 5/8"
Length of cylinder without shank and mounts: 12"
Mounting hole to shank hole: 14"
Stroke Length: 7-1/2"
Comes with two 5/8" mounting bracket holes
Comes with two 1/2" pipe thread ports for hydraulic lines