Ramps
Nationwide Trailers Parts Store 60" (5 ft) Slide-In Utility Trailer Ramp (Sold Individually)
This ramp is designed for use on most PJ Trailers CC, B5, B6, B8, and C8 models. The ladder ramp is made of high strength steel and painted black for corrosion resistance. Details/Specs: Available in 60" L x 13" W x 3" H This ramp is used on most C4 and C5 trailers. 62-1/4" overall length w/ramp support hook Weight: 59 lbs each Each ramp rated for 10,000 lbs Hooks welded on the inside edge of the main channels 3" channel supports Black powder-coat finish Sold individually (not as a pair)
$150.00 $135.00
77" Slide-In Dump Trailer Ramp (Sold Individually)
This ramp is designed for use on most PJ Trailers dump models, D7, DL, DJ, D8, D9, DS, DN, DM, DH, and D3. The ladder ramp is made of high strength steel and painted black for corrosion resistance. Details/Specs: 77" L x 16" W Weight: 85 lbs each Each ramp rated for 5000 lbs 3" channel supports Black powder-coat finish Sold individually (not as a pair)
$200.00 $175.44
Nationwide Trailers Parts Store 96" (8 ft) Slide-In Gooseneck Trailer Ramp (Sold Individually)
This ramp is is used on all of our straight deck goose neck trailers FD and FS models.The ladder ramp is made of high strength steel and painted black for corrosion resistance. Details/Specs: 96" L x 16" W Weight: 100 lbs each Each ramp is rated for 4500 lbs 3" channel supports Black powder-coat finish Sold individually (not as a pair)
$250.00 $210.99
Nationwide Trailers Parts Store Car Hauler Ramp Spring
Replacement spring for car hauler ramp. Fits 1.5" round bar Note: Select left or right side.
$24.99
Nationwide Trailers Parts Store Flip-over Ramps Double Hinge Assembly
This assembly is the link between flip-over ramps and the rear bumper of a dovetail trailer. The assembly mounts to the main ramp rod on the back bumper of the trailer and attaches directly to the ramp. For use with the standard and HD flip-over dovetail ramps on all PJ Trailer models FD, LD, FS, and LS. Details/Specs: Includes 180409 ramp spring Includes ramp rod
$78.49
Nationwide Trailers Parts Store Fold-Up Gate Spring
Replacement spring for fold-up gate. Works on left or right side. Fits 1" ramp rod. -Used on PJ Trailers with a stand up or lay-in gate-Two springs required per gate- Assists user in lifting the gate Material: SteelFinish: Powder coatInside Opening : 1-1/4"Overall Width : 5"Coil finger degree: 180'Number of coils: 12Wire Diameter : 3/8"
$29.99 $26.00
Nationwide Trailers Parts Store Gen-Y Aluminum Ramps (6', 8')
The GenY Aluminum ramp is excellent for use on low clearance, single vehicle car haulers. These ramps feature wide plate style serrated cross rungs for maximum traction in any weather condition. The hybrid hook and plate ramp ends add extra convenience to this setup allowing for use with a variety of trailer types. Details/Specs: 6′ Ramps: 72″ Long x 14″ Wide x 2″ Thick Maximum 3,000 LB Capacity (1 Set = 6,000 LB) 8′ Ramps: 96″ Long x 15″ Wide x 3.25″ Thick Maximum 5,000 LB Capacity (1 Set = 10,000 LB)
$490.99 - $854.99
HEAVY DUTY ADJUSTABLE DRAW LATCH
Adjust to fit using the threaded draw ring. Zinc-plated for corrosion resistance. Buyers Products Heavy Duty Adjustable Draw Latch is used for securing truck and trailer bins and cabinets. Constructed from zinc-plated steel, it has a threaded draw ring to adjust to your applications. Used on new PJ trailers with Monster ramps to help hold ramp down
$25.99 $19.99
Nationwide Trailers Parts Store Monster Ramp Double Hinge Assembly Spring
This is intended for a 1.5" round bar 1.75" I.D, ramp spring is for the double hinge assembly used on the 44″ wide monster ramps. Note: Select left or right side.
$21.49
Nationwide Trailers Parts Store Monster Ramp Spring w/ Hook
This is the Outboard Lift assist spring used to help extend the 44" wide monster ramps on the driver's side of the trailer.This spring has a long tail with a curved hook on the end and is mounted on the ramp rod, not the double hinge. Fits 1.5" round bar Note: Select left or right side.
$45.49
Nationwide Trailers Parts Store Ramp Rod Keeper - 7.5″ x 3″
This 7.5" tall ramp rod keeper is designed to be used on the back bumper of a trailer with a 1.5" diameter rod.This is the larger ramp rod keeper typically found on rear bumpers of FD/FS trailers. Details/Specs: 7.5" tall, 1/2" thick, 3" wide Opening ~2" inches diameter
$43.99
Nationwide Trailers Parts Store Ramp Rod Keeper – 4" x 3"
This 4" tall ramp rod keeper is designed to be used on the back bumper of a trailer with a 1.5" diameter rod. Details/Specs: 4" tall, 3/8" thick, 3" wide Opening ~1 5/8" inches diameter
$9.00
Nationwide Trailers Parts Store Ramp Rod Pipe 1.5″ x 3″
Pipe is to be welded to the side of the ramp rod keeper. A hole is drilled in one end to pin the ramp rod into place. Details/Specs: 3" L x 1.5" Diameter
$4.99
Nationwide Trailers Parts Store Ramp Stabilizer Pin
For use on “seminole” trailers to locate ramp stabilizer bars to sides of trailer and “standup” ramps.
$4.49
Nationwide Trailers Parts Store Stand-up Ramp Stabilizer Bar 2 3/8" x 36"
Bar holds ramp in upright position for travel. Bar is 3/8" thick, 2" wide by 36" long with holes on ends for quick pins. Details/Specs: 2-3/8" x 36"
$61.99 $52.99
Nationwide Trailers Parts Store Utility Trailer Gate Mounting Kit
Gate mounting kit for PJ Trailers U6, U7 or U8 model utility trailers. Details/Specs: Kit includes: 2x180402 Spring for Fold-up Gate, L or R 2x180176 Hinge Pin, Gate 1" x 7.5" 2x180161 Spring for Gate Latch, 4"x5/8" 2x180163 Pipe, 4"x1/2" (for gate latch) 2x180164 Pin, Cotter 1-1/4"x3/16" 2x180124 Lynch pin 7/16" 2x180178 Gate Latch Handle Pin Mx 4x180162 Pipe 1.25"x1/2" For gate latch 4x180193 Ramp gate Keeper (small) - 1" Rod
$65.00