Hardware

26 products

  • Sale -16% Half-Pivot Greasable Hinge, Dump/Tilt Trailers Hardware Nationwide Trailers Parts Store Half-Pivot Greasable Hinge, Dump/Tilt Trailers Hardware Nationwide Trailers Parts Store

    Nationwide Trailers Parts Store Half-Pivot Greasable Hinge, Dump/Tilt Trailers

    Half pivot hinge for dumps/tilts. This is the hinge that is used on most PJ Trailer Dumps and Tilts. Details/Specs: Includes grease fitting Pin is welded in Sold unpainted, This may have some surface rust  Dimensions: 5" L x 3" W x 3" H

    $49.99 $41.95

  • Autolocking Door Hold Back Hardware Nationwide Trailers Parts Store

    Nationwide Trailers Parts Store Autolocking Door Hold Back

    This is the newest style dump door hold back used on PJ Dump trailers smaller than DD and DS models built after November 2012. It utilizes a spring loaded locking pin and ramp plate welded to the upper hinges of the rear door. Note: Specify left or right side.

  • Last stock! Cam Door Latch Keeper Hardware Nationwide Trailers Parts Store Cam Door Latch Keeper Hardware Nationwide Trailers Parts Store

    Nationwide Trailers Parts Store Cam Door Latch Keeper

    Top keeper for cam door latch on PJ Trailers dump trailers. A- is top B- is Bottom

  • Lynch Pin Hardware (FS) Nationwide Trailers Parts Store

    Nationwide Trailers Parts Store Lynch Pin

    Lynch pin made of zinc dichromate plated steel.  Details/Specs: 3/16" 1-1/8 inch usable length 1-3/4" length 7/16" 1-19/32" usable length 2-1/4 length

    $1.49 - $2.99

  • Hinge Gate Pin, 1″ x 7-1/2″ Hardware Nationwide Trailers Parts Store

    Nationwide Trailers Parts Store Hinge Gate Pin, 1″ x 7-1/2″

    1" x 7 1/2" ramp gate hinge pin. Same as included in the Gate Ramp Mounting Kit.

    $9.99

  • Cam Door Latch Kit Hardware Nationwide Trailers Parts Store

    Nationwide Trailers Parts Store Cam Door Latch Kit

    Replacement dump trailer cam door latch kit used on PJ Trailer models D7, D9, DL, and DJ. Details/Specs: Construction: Steel  Color: No paint finish Handle is formed steel with a riveted swivel Handle Length: 13-1/2"  Kit contains: 180105 x 1 Keeper Bottom Cam Door Latch-Dump 180106 x 1 Keeper Top Cam Door Latch-Dump 180107 x 1 Lug Bottom Cam Door Latch-Dump 180108 x 1 Lug Top Cam Door Latch-Dump 180109 x 1 Handle Cam Door Latch-Dump 180110 x 1 Hasp Cam Door Latch-Dump Door

    $49.99

  • Greasable Hinge, Dump Trailer Door Hardware Nationwide Trailers Parts Store

    Nationwide Trailers Parts Store Greasable Hinge, Dump Trailer Door

    Greasable dump door hinge. Fits PJ Trailers D5-D9 models. Ships unpainted.  

    $13.49

  • Cam Door Lock Hasp 1-Piece w/Rivet Hardware Nationwide Trailers Parts Store

    Nationwide Trailers Parts Store Cam Door Lock Hasp 1-Piece w/Rivet

    Heavy duty cam lock handle hasp with rivet. 1-piece design. Details/Specs: Overall Length: 5-1/2" Mounting Hole Centers: 4-1/4" Width: 1"

    $10.00

  • Floor Screw, 1/4" x 2-1/4" Hardware Nationwide Trailers Parts Store

    Nationwide Trailers Parts Store Floor Screw, 1/4" x 2-1/4"

    Trailer floor screws used to secure wood deck boards to trailer frame. Counter sunk head for flush mount. Details/Specs:  1/4" diameter, 28 TPI 2 1/4" length Thread cutting tip, Type F Requires a 7/32" pre-drilled hole Black phosphate finish Sold in 1 lb. (~30 screws) & 4 lb. (~120 screws) boxes Note: Uses a T30 torx driver not included

    $10.49 - $39.49

  • Rampgate Keeper (Small) – For 1" Rod

    Nationwide Trailers Parts Rampgate Keeper (Small) – For 1" Rod

    The Rampgate Keeper is a sturdy tab designed to be welded to the back of a trailer, providing a secure mounting point for pivot pins on trailer gates. Specifically crafted to fit a 1" rod, this keeper ensures stability and durability for trailer gates and ramps. It’s part of a four-piece mounting kit, ideal for enhancing trailer functionality and safety. Features Fits 1" Rod: Designed for compatibility with standard 1" diameter rods. Durable Weld-On Design: Easily welds to the trailer's back frame for a secure hold. Flat 2"x 3/8" L x 2" W x 3/8" D

    $5.99

  • Cotter Pin Hardware (FS) Nationwide Trailers Parts Store

    Dexter Axle Cotter Pin

    Standard use cotter pin. 1-1/2″ x 1/8″ for use on 7k axle. 2-1/2″ x 1/4″ for use on 10k axles.

  • Round Rubber Bumper/Door Stop - 1" x 2 1/2" Hardware Nationwide Trailers Parts Store

    Nationwide Trailers Parts Store Round Rubber Bumper/Door Stop - 1" x 2 1/2"

    This recessed bumper is used as feet on the bottom of products, on the side as protectors and on the top as absorbers. They are used to prevent metal-to-metal or surface-to-surface contact. Common uses include counter-top appliances, door stops, cart edges, furniture feet, drawer stops and thousands of places where they are installed with fasteners to protect metal and wood. Details/Specs: Outside Diameter: 2 1/2″ Height: 1″ Recess Depth: 1/2″ Recess Width: 1 1/8″ Hole Diameter: 3/8″

    $2.99

  • Lug Nut, 5/8" - 18 - 90° Cone Hardware Nationwide Trailers Parts Store

    Nationwide Trailers Parts Store Lug Nut, 5/8" - 18 - 90° Cone

    Lug nut for 5/8" stud. Details/Specs: 5/8" Diameter 18 Threads per inch 90 Degree cone taper Sold Individually 

    $1.49

  • T-Handle Door Holder, 6” Hook Hardware Nationwide Trailers Parts Store

    Nationwide Trailers Parts Store T-Handle Door Holder, 6” Hook

    Designed to hold doors open against the side of a body. The hook manually engages and disengages.

    $6.49

  • Coupler Snapper Pin Hardware (FS) Nationwide Trailers Parts Store

    Buyers Products Coupler Snapper Pin

    This multi-purpose yellow zinc plated snapper pin can secure most styles of coupler latches, ramps and gates. Details/Specs: 1/4″ x 2″ Pin Diameter: 1/4" Pin Length: 2" Usable Length: 1-13/16" Loop Clearance: 1-1/2" 1/4″ x 2-1/2″ Pin Diameter: 1/4" Pin Length: 2-1/2" Usable Length: 2-1/2" Loop Clearance: 1-3/4" 3/8" x 2-1/2" Pin Diameter: 3/8" Pin Length: 2-1/2" Usable Length: 2-3/8" Loop Clearance: 1-1/2" Manufacturer: BuyersPart No: 66050 (1/4″ x 2″), 66063 (1/4″ x 2-1/2″), 66060 (3/8" x 2-1/2")

    $2.00 - $2.50

  • Greasable Bullet/Barrel Style Hinge - 4 1/2" 6" Hardware Nationwide Trailers Parts Store

    Nationwide Trailers Parts Store Greasable Bullet/Barrel Style Hinge - 4 1/2" 6"

    Bullet/barrel hinge with grease fitting. Available in 4-1/2" and 6" in length. Actual product fabrication may vary slightly from photo.

    $10.49 - $14.49

  • Cam Door Lock Hasp 2-Piece w/o Rivet Hardware Nationwide Trailers Parts Store

    Nationwide Trailers Parts Store Cam Door Lock Hasp 2-Piece w/o Rivet

    Heavy duty cam lock handle hasp without rivet. 2-piece design. Details/Specs: Overall Length: 5" Mounting Hole Centers: 4" Width: 2"

    $12.00

  • Gooseneck Coupler Set Screw, 3/4" Hardware Nationwide Trailers Parts Store

    Nationwide Trailers Parts Store Gooseneck Coupler Set Screw, 3/4"

    3/4″ coarse-thread bolt holds tension between the coupler outer housing and coupler insert of the gooseneck coupler. Fits either round or square couplers. Includes jam nut.

    $14.29

  • Steel Stake Pocket - 2" x 4" Hardware Nationwide Trailers Parts Store

    Nationwide Trailers Parts Store Steel Stake Pocket - 2" x 4"

    Weld on replacement for worn or cracked stake pockets. Details/Specs: Standard 2" x 4" stake pocket Unpainted

    $4.49

  • Nut, 7/16"-20 Hex Zinc GR2 Hardware Nationwide Trailers Parts Store

    Nationwide Trailers Parts Store Nut, 7/16"-20 Hex Zinc GR2

    Grade 2, zinc plated Hexagonal nut - 7/16"-20.

    $0.49

  • Last stock! Hinge Strap Style 16" 270° Zinc Hinge Strap Style 16" 270° Zinc

    Hinge Strap Style 16" 270° Zinc

    16″ Strap hinge for trailer and RV doors. Sharply bent hinge pivot point for extra 5/16″ corner clearance and 1/2″ offset gap for thick door seals. 270° action when placed on trailer corner. Strap mounting holes on 6.50″ CentersHinge mounting holes on 3.25″ Centers

    $26.99

  • Hinge Half Pivot For Lonestar tilt Hinge Half Pivot For Lonestar tilt

    Nationwide Trailers Parts Store Hinge Half Pivot For Lonestar tilt

    Half pivot hinge for Lonestar full tilt trailers Includes grease fitting Pin is welded in Sold unpainted, This may have some surface rust  Dimensions 5" x 4" x 4.5"

    $72.99

  • License Plate Bracket, Universal Hardware Nationwide Trailers Parts Store

    Peterson License Plate Bracket, Universal

    For use with most stud-mounted tail lights and stop, turn, tail with license light. Zinc-plated steel. Hardware not included. Manufacturer: PetersonPart No: B428-09

    $2.49

  • Quick Link, Zinc-Plated Hardware Nationwide Trailers Parts Store

    Nationwide Trailers Parts Store Quick Link, Zinc-Plated

    Premium-grade quick links for chain, rope & cable connections; threaded nut closure for added security. Grade 316 stainless steel has superior corrosion resistance and strength over grade 304. Excellent choice for boating, sailing, marine and other harsh-condition applications.

    $2.49 - $4.49


I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"

Hardware

High-Quality Trailer Hardware & Accessories

Every trailer relies on dependable hardware to ensure smooth operation, durability, and security on the road. Nationwide Trailers offers an extensive collection of high-quality trailer hardware and accessories designed to withstand heavy use and tough conditions. From sturdy door hinges and handles to robust latches and locks, our trailer hardware selection has the parts you need to keep your trailer in top shape.

Your Source for Trailer Hardware and Replacement Parts

Our trailer hardware collection includes everything you need for secure and reliable trailer performance, whether you're outfitting a new trailer or upgrading an existing one. Explore our inventory of:

  • Door Hinges: Heavy-duty hinges crafted for stability and security, ensuring your trailer doors stay firmly in place.
  • Latches and Locks: Protect your cargo with durable latches and locks designed to secure trailer doors and compartments.
  • Handles: Our ergonomic door handles offer a strong, reliable grip for frequent use, available in various materials and finishes to match your trailer.
  • Tie-Downs and Anchor Points: Secure your cargo with tie-downs and anchor points, designed to handle the weight and keep loads in place during transit.
  • Brackets and Mounts: Heavy-duty brackets and mounting solutions to support a variety of trailer applications, from spare tire holders to equipment mounts.

Why Choose Nationwide Trailers for Trailer Hardware?

Nationwide Trailers is a trusted supplier for trailer hardware, offering reliable parts from top manufacturers. Our extensive hardware selection ensures you find components built to last, whether you own a PJ Trailer, LoneStar Trailer, or other trailer brands. Each part is chosen for its durability and strength, making it easier to maintain and upgrade your trailer to meet your specific needs.

With our fast and secure online ordering, Nationwide Trailers makes it simple to find and purchase the right hardware for your trailer. Plus, our knowledgeable team is here to help answer any questions and guide you to the products that best fit your requirements.

Shop our trailer hardware collection today for quality parts that ensure safety, reliability, and convenience on every haul. Contact us online if you need further assistance or recommendations.

Recently viewed products

© 2024 Nationwide Trailer Parts, Powered by Shopify

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Login

Forgot your password?

Don't have an account yet?
Create account