Ramps, Springs & Accessories

This ramp is designed for use on most PJ Trailers CC, B5, B6, B8, and C8 models. The ladder ramp is made of high strength steel and painted black for corrosion resistance. Details/Specs: Available in  60" L x 13" W x 3" H This ramp is used on most C4 and C5 trailers. 62-1/4" overall length w/ramp support hook Weight: 59 lbs each Each ramp rated for 10,000 lbs Hooks welded on the inside edge of the main channels 3" channel supports Black powder-coat finish Sold individually (not as a pair)

Read more less

This is the Outboard Lift assist spring used to help extend the 44" wide monster ramps on the driver's side of the trailer.This spring has a long tail with a curved hook on the end and is mounted on the ramp rod, not the double hinge. Fits 1.5" round bar Note: Select left or right side.

Read more less

Replacement spring for fold-up gate. Works on left or right side. Fits 1" ramp rod. -Used on PJ Trailers with a stand up or lay-in gate-Two springs required per gate- Assists user in lifting the gate Material: SteelFinish: Powder coatInside Opening : 1-1/4"Overall Width : 5"Coil finger degree: 180'Number of coils: 12Wire Diameter : 3/8"

Read more less

The Monster Ramp Double Hinge Assembly Spring is specifically designed for 44" wide monster ramps, providing robust support and ease of operation. This spring fits a 1.5" round bar with a 1.75" inner diameter (I.D.), ensuring a secure fit for heavy-duty applications. Available in both left-hand and right-hand configurations, it is perfect for trailers requiring durable and reliable ramp assistance.

Read more less

Bar holds ramp in upright position for travel. Bar is 3/8" thick, 2" wide by 36" long with holes on ends for quick pins. Details/Specs: 2-3/8" x 36"

Read more less

This ramp is designed for use on most PJ Trailers dump models, D7, DL, DJ, D8, D9, DS, DN, DM, DH, and D3. The ladder ramp is made of high strength steel and painted black for corrosion resistance. Details/Specs: 77" L x 16" W Weight: 85 lbs each Each ramp rated for 5000 lbs 3" channel supports Black powder-coat finish Sold individually (not as a pair)

Read more less

The Ramp Stabilizer Pin is a durable component designed to secure ramp stabilizer bars to the sides of "Seminole" trailers or "standup" ramps. Built to withstand frequent use, this pin ensures that ramps remain stable and secure. Features Reliable Fastening: Provides a secure hold for ramp stabilizers. Durable Construction: Made for long-lasting performance in rugged conditions.

Read more less

The Ramp Rod Keeper is designed for mounting on the back bumper of trailers to secure 1.5" diameter rods. This heavy-duty keeper is 4" tall and 3" wide, with a 1 5/8" diameter opening, ensuring a secure hold for ramp rods in transit. Built with a 3/8" thickness, it offers durability and stability for long-term use in heavy-duty applications. Features Compatible with 1.5" Diameter Rods: Provides a secure fit for standard ramp rods. Sturdy Dimensions: 4" tall, 3" wide, and 3/8" thick for reliable strength. Easy Installation: Weld-on design for a secure attachment to the trailer bumper.

Read more less

This ramp is is used on all of our straight deck goose neck trailers FD and FS models.The ladder ramp is made of high strength steel and painted black for corrosion resistance. Details/Specs: 96" L x 16" W Weight: 100 lbs each Each ramp is rated for 4500 lbs 3" channel supports Black powder-coat finish Sold individually (not as a pair)

Read more less

The Flip-Over Ramp Double Hinge Assembly is designed to connect flip-over ramps to the rear bumper of dovetail trailers, offering robust support and reliable operation. This assembly mounts to the main ramp rod on the trailer’s back bumper and attaches directly to the ramp, making it compatible with standard and heavy-duty flip-over dovetail ramps on PJ Trailer models FD, LD, FS, and LS. Details/Specs Included Components: Comes with a 180409 ramp spring and ramp rod. Compatibility: Fits PJ Trailer models FD, LD, FS, and LS with dovetail ramps. Heavy-Duty Design: Ensures durability and stable ramp performance.

Read more less

This 7.5" Tall Ramp Rod Keeper is a sturdy, essential component for securing 1.5" diameter ramp rods, commonly found on FD/FS trailer rear bumpers. With a durable 1/2" thick design and a 3" width, this rod keeper provides reliable holding power, ensuring that your ramp stays securely fastened during transport. Features Dimensions: 7.5" tall, 3" wide, and 1/2" thick. Compatible with 1.5" Diameter Rods: Ideal for trailers equipped with larger ramp rods. Sturdy Construction: Designed for durability and heavy-duty use. Approximate 2" Opening: Provides a secure fit for trailer applications.

Read more less

Pipe is to be welded to the side of the ramp rod keeper. A hole is drilled in one end to pin the ramp rod into place. Details/Specs: 3" L x 1.5" Diameter  

Read more less

Replacement spring for car hauler ramp. Fits 1.5" round bar Note: Select left or right side.

Read more less

Adjust to fit using the threaded draw ring. Zinc-plated for corrosion resistance. Buyers Products Heavy Duty Adjustable Draw Latch is used for securing truck and trailer bins and cabinets. Constructed from zinc-plated steel, it has a threaded draw ring to adjust to your applications. Used on new PJ trailers with Monster ramps to help hold ramp down

Read more less

The GenY Aluminum ramp is excellent for use on low clearance, single vehicle car haulers. These ramps feature wide plate style serrated cross rungs for maximum traction in any weather condition. The hybrid hook and plate ramp ends add extra convenience to this setup allowing for use with a variety of trailer types. Details/Specs: 6′ Ramps: 72″ Long x 14″ Wide x 2″ Thick Maximum 3,000 LB Capacity (1 Set = 6,000 LB) 8′ Ramps: 96″ Long x 15″ Wide x 3.25″ Thick Maximum 5,000 LB Capacity (1 Set = 10,000 LB)

Read more less