This is the newest style dump door hold back used on PJ Dump trailers smaller than DD and DS models built after November 2012. It utilizes a spring loaded locking pin and ramp plate welded to the upper hinges of the rear door.
Note: Specify left or right side.
Replacement dump trailer cam door latch kit used on PJ Trailer models D7, D9, DL, and DJ.
Details/Specs:
Construction: Steel
Color: No paint finish
Handle is formed steel with a riveted swivel
Handle Length: 13-1/2"
Kit contains:
180105 x 1 Keeper Bottom Cam Door Latch-Dump
180106 x 1 Keeper Top Cam Door Latch-Dump
180107 x 1 Lug Bottom Cam Door Latch-Dump
180108 x 1 Lug Top Cam Door Latch-Dump
180109 x 1 Handle Cam Door Latch-Dump
180110 x 1 Hasp Cam Door Latch-Dump Door
Trailer floor screws used to secure wood deck boards to trailer frame. Counter sunk head for flush mount.
Details/Specs:
1/4" diameter, 28 TPI
2 1/4" length
Thread cutting tip, Type F
Requires a 7/32" pre-drilled hole
Black phosphate finish
Sold in 1 lb. (~30 screws) & 4 lb. (~120 screws) boxes
Note: Uses a T30 torx driver not included
3/4″ coarse-thread bolt holds tension between the coupler outer housing and coupler insert of the gooseneck coupler. Fits either round or square couplers. Includes jam nut.
Half pivot hinge for dumps/tilts. This is the hinge that is used on most PJ Trailer Dumps and Tilts.
Details/Specs:
Includes grease fitting
Pin is welded in
Sold unpainted, This may have some surface rust
Dimensions: 5" L x 3" W x 3" H
Half pivot hinge for Lonestar full tilt trailers
Includes grease fitting
Pin is welded in
Sold unpainted, This may have some surface rust
Dimensions 5" x 4" x 4.5"
16″ Strap hinge for trailer and RV doors. Sharply bent hinge pivot point for extra 5/16″ corner clearance and 1/2″ offset gap for thick door seals. 270° action when placed on trailer corner.
Strap mounting holes on 6.50″ CentersHinge mounting holes on 3.25″ Centers
For use with most stud-mounted tail lights and stop, turn, tail with license light. Zinc-plated steel. Hardware not included.
Manufacturer: PetersonPart No: B428-09
Made from steel grating for increased traction
12.5" wide allowing both feet to be on the step at once for improved stability & safety
Excellent grip in mud & snow
Self-cleaning
Premium-grade quick links for chain, rope & cable connections; threaded nut closure for added security. Grade 316 stainless steel has superior corrosion resistance and strength over grade 304. Excellent choice for boating, sailing, marine and other harsh-condition applications.
Le Rampgate Keeper est une languette robuste conçue pour être soudée à l'arrière d'une remorque, offrant un point de montage sécurisé pour les axes de pivot sur les portes de remorque. Spécialement conçu pour s'adapter à une tige de 1", ce support assure la stabilité et la durabilité des portes et rampes de remorque. Il fait partie d'un kit de montage en quatre pièces, idéal pour améliorer la fonctionnalité et la sécurité de la remorque.
Caractéristiques
Convient aux tiges de 1" : Conçu pour être compatible avec les tiges de 1" de diamètre standard.
Conception à souder durable : se soude facilement au cadre arrière de la remorque pour un maintien sûr.
Plat 2"x 3/8" L x 2" L x 3/8" P
This recessed bumper is used as feet on the bottom of products, on the side as protectors and on the top as absorbers. They are used to prevent metal-to-metal or surface-to-surface contact. Common uses include counter-top appliances, door stops, cart edges, furniture feet, drawer stops and thousands of places where they are installed with fasteners to protect metal and wood.
Details/Specs:
Outside Diameter: 2 1/2″
Height: 1″
Recess Depth: 1/2″
Recess Width: 1 1/8″
Hole Diameter: 3/8″
