Crics

22 produits

  • Andersen RV Camper Leveler w/ Chock Trailer Jacks Nationwide Trailers Parts Store Andersen RV Camper Leveler w/ Chock Trailer Jacks Nationwide Trailers Parts Store

    Andersen Hitches RV Camper Leveler w/ Chock Andersen

    The RV Camper Leveler is the fastest and easiest way to level your trailer camper. This kit is easy to use and levels your trailer in minutes. Simply place the leveler under the low-side tire and drive up until you reach level. Then, place the attached chock under the leveler to secure it in place and you're done. Each kit includes one leveler and one chock for a single wheel. For two axle trailers, you will need two kits. Details/Specs: Level from 1/2" to 4" For use with trailers up to 30,000 Lbs and up to 32" tire diameter  Made is USA with recycled materials 3-year limited warranty

    $39.50

  • Jack Crank Handle Extension, 16" Trailer Jacks Nationwide Trailers Parts Store

    Nationwide Trailers Parts Store Jack Crank Handle Extension, 16"

    16" jack crank handle extension for 10K/12K gooseneck trailer jacks. 1" x 3 1/2" extension sleeve, grease fitting, and hardware included.

  • Dernier stock ! Bulldog Round Topwind Swivel Jack, 5k (Pipe Mount)

    Nationwide Trailers Parts Store Bulldog Round Topwind Swivel Jack, 5k (Pipe Mount)

    Top-wind swivel pipe mount jack. This is the jack commonly used as support jacks on the back of PJ Trailers Car Hauler and Buggy hauler Trailers, and also as the tongue jack on most PJ Trailers U6, U7, U8, C4, and C5 models. Details/Specs: 5,000 lbs. lift/static capacity This is the same jack that is commonly used as support jacks on the back of the PJ Trailers Car Hauler and Buggy Hauler trailers. This is the standard tongue jack that is put on most PJ Trailers U6, U7, U8, C4, and C5 model trailers. Overall Length Retracted : 20" Travel : 15" Pipe ID : 2" Retracted to Center of swivel :12-3/4" Extended to Center of swival : 27.75"

    $94.43

  • Jack Crank Handle Replacement, Sidewind Trailer Jacks Nationwide Trailers Parts Store

    Nationwide Trailers Parts Store Jack Crank Handle Replacement, Sidewind

    Replacement jack crank handle. 6" of clearance.

    $25.49

  • Dernier stock ! Anderson Trailer Jack Block Trailer Jacks Nationwide Trailers Parts Store Anderson Trailer Jack Block Trailer Jacks Nationwide Trailers Parts Store

    Andersen Hitches Trailer Jack Block Andersen

    The Andersen 'Trailer Jack Block' eliminates nearly all of the movement in your parked RV or Trailer! Each block comes with built-in magnets so you can attach each block to the bottom of your stabilizer and hit auto-level - no need to check and adjust each block. Fast and super-convenient!  For best results, use two blocks at the front and two in the back of your RV or Trailer. For trailers with more than 4 stabilizer jacks, use one block per stabilizer. Details/Specs: 8" high (14" double stacked) 12" diameter base & 10" diameter top Recessed pad area is 9-1/8" diameter, recessed post-hole is 2-1/2" diameter Each block weighs 5.3 lbs Rated 6,000 lbs (single block) and 1,500 lbs (double-stack) Eliminates nearly all movement and sway in parked RV's and Trailers Less stress on your RV or Trailer Extremely strong and durable Stackable for extra height (max 2 high)  Powerful, built-in magnets for easy set up Resists dirt, grime and oil 100% Made in the USA Lifetime Warranty

    $51.49

  • Dernier stock ! Jack Crank Handle Replacement, Sidewind Jost Jacks Trailer Jacks Nationwide Trailers Parts Store

    Nationwide Trailers Parts Store Jack Crank Handle Replacement, Sidewind Jost Jacks

    Replacement jack crank handle for Jost jacks. This handle is similar to a standard gooseneck jack crank handle but is longer to clear the side of the trailer. 19" of clearance.

    $35.99

  • Sale -7% Blaylock EZ Jack Trailer Jacks Nationwide Trailers Parts Store Blaylock EZ Jack Trailer Jacks Nationwide Trailers Parts Store

    Blaylock Blaylock EZ Jack

    sonstructed of heavy-duty, corrosion-resistant cast aluminum for commercial or consumer use. Serves as a jack for easy tire changes on tandem-axles and a wheel chock to help keep your trailer in place on inclines and most surfaces. Enables you to easily change a tire on your tandem-axle trailer and can also be used as a leveler for an RV when parked on uneven terrain. Details/Specs: 20,000 lbs capacity. Lifetime warranty. Made in USA Manufacturer: BlaylockManufacturer's Part Number: EZ100

    $90.99 $84.76

  • Dernier stock ! RAM Square Topwind Jack w/ Dropleg, 7K Trailer Jacks Nationwide Trailers Parts Store

    Nationwide Trailers Parts Store RAM Square Topwind Jack w/ Dropleg, 7K

    This square topwind jack has a large rectangular base foot and features a painted outer tube with plated inner tube and drop leg. Details/Specs: Direct weld to outer square tube 7,000 lbs. lift 8,000 lbs. support 15″ Travel 13.50″ additional drop leg extension

    $99.99

  • Bulldog Jack, 12K 2-Speed Sidewind Dropleg w/Front Pull Pin for GN Trailer Jacks Nationwide Trailers Parts Store

    Nationwide Trailers Parts Store Bulldog Jack, 12K 2-Speed Sidewind Dropleg w/Front Pull Pin for GN

     Constructed with 4" square tubing and 7-gauge superior alloy steel. State of the art 2-speed gearbox with power and speed for the most effective and efficient jack at all loads. Designed for today's standard agricultural, construction and industrial trailer applications. User friendly design makes operation smooth and easy. Engineered alloys for enhanced strength, stability and side load capability. Planetary gearbox fits within the width profile of the jack's outer tube eliminating the need for spacers. Easy-lifting 27 turns per 1" (planetary) and 29 turns per 1" (traditional) of travel. In high gear, the cranking ratio is a speedy 9 turns per 1" of travel, the fastest in its weight class. Details/Specs: Lift Capacity: 10,000 lbs Static Capacity: 12,000 lbs Dropleg Travel: 12-1/2" Dropleg pull-pin to the front. Adjustable dropleg with spring return and additional adjustment of 13-1/2" Weld on application with black finish Crank handle not included Manufacturer: BulldogManufacturer's Part Number: 183816

    $410.38

  • Sale -9% Jack Crank Handle Extension Sleeve, 1" x 3-1/2" Trailer Jacks Nationwide Trailers Parts Store Jack Crank Handle Extension Sleeve, 1" x 3-1/2" Trailer Jacks Nationwide Trailers Parts Store

    PJ Trailers Jack Crank Handle Extension Sleeve, 1" x 3-1/2"

    1" x 3 1/2" jack crank extension sleeve for 10K/12K gooseneck trailer jack handle extensions. Hardware included.

    $6.00 $5.49

  • Bulldog Sidewind Jack w/ Dropleg, 12K GN Trailer Jacks Nationwide Trailers Parts Store

    Nationwide Trailers Parts Store Bulldog Sidewind Jack w/ Dropleg, 12K GN

    Constructed with 4" square tubing and 7-gauge superior alloy steel. Used as the "slave" jack with a 2-speed jack set. Easy-access gear box with grease fitting for routine maintenance. Weld on application with black powder coat finish. Details/Specs: Lift Capacity: 10,000 lbs Static Capacity: 12,000 lbs Dropleg Travel: 12 1/2" 1:1.5 gear ratio Dropleg pull-pin to the front Adjustable dropleg with spring return and additional adjustment of 13-1/2" Crank handle not included Manufacturer: BulldogManufacturer's Part Number: 182815

    $320.99

  • Dernier stock ! Pro Series Sidewind Jack w/ Dropleg, 12K (Gooseneck) Trailer Jacks Nationwide Trailers Parts Store

    Nationwide Trailers Parts Store Ram Sidewind Jack w/ Dropleg, 12K (Gooseneck)

    This is a sidewind jack with drop leg for gooseneck trailers. Weld on application with black powder coat finish. Details/Specs: Lift Capacity: 10,000 lbs. Static Capacity: 12,000 lbs. Drop leg Travel: 12-1/2" Drop leg pull-pin to the front Adjustable drop leg with spring return and additional adjustment of 13-1/2" Crank handle not included

    $199.99

  • Bulldog Square Sidewind Jack w/ Dropleg, 8K Trailer Jacks Nationwide Trailers Parts Store

    Nationwide Trailers Parts Store Bulldog Square Sidewind Jack w/ Dropleg, 8K

    This sidewind industrial drop-leg jack features 15" of travel and 13-1/2" of additional adjustment. Constructed from heavy-guage 2-1/2" square tubing for direct weld mounting. Bushing are oil-impregnated for improved bearing and gear life. Details/Specs: 5,000 lbs lift 8,000 lbs of support Includes crank handle, heavy-duty base, grey outer tube and zinc-plated inner tube. Manufacturer: BulldogManufacturer's Part Number: 190754

    $165.99

  • Dernier stock ! Bulldog Electric Jack Motor, 7.5K Trailer Jacks Nationwide Trailers Parts Store Bulldog Electric Jack Motor, 7.5K Trailer Jacks Nationwide Trailers Parts Store

    Bulldog Bulldog Electric Jack Motor, 7.5K

    Jack motor compatible with all Bulldog single speed and traditional style gear box, 2 speed units used in tandem with a single speed slave jack. Permanently lubricated to provide years of maintenance free use. Custom designed wiring harness & rocker switch enclosed in a weather proof box. Kit includes all necessary components for ease of installation Details/Specs: 7,500 lbs capacity State of the art 12VDC electric motor 5 year warranty Manufacturer: BulldogManufacturer's Part Number: 182420

    $1,722.51

  • Dernier stock ! Round Trailer Jack, A-Frame, 5,000 lbs. Lift Capacity, Top Wind, Bolt-On, 15 in. Travel

    Round Trailer Jack, A-Frame, 5,000 lbs. Lift Capacity, Top Wind, Bolt-On, 15 in. Travel

    BULLDOG round jacks are recognized as the industry standard by leading agricultrual, commercial, horse, livestock, and other trailer manufacturers. For more than three quarters of a centruy, BULLDOG jacks have been demonstrated to be the most reliable, field-proven jacks on the market. Smooth, comfortable, ergonomic design Dependable vertical and side load capacity Proven reliability for long term use at rated loads Precision fitted parts for extra stability A-Frame models listed have grey painted outer and inner tubes - All other models have grey painted outer and clear zinc inner tubes Part# 18-460

    $89.99

  • Replacement Planetary Gearbox Kit for Bulldog Jacks - 10-12K

    Replacement Planetary Gearbox Kit for Bulldog Jacks - 10-12K

    Fits Bulldog Jacks with 10,000-lb lift capacity and 12,000-lb static capacity Includes hardware Quantity: 1 replacement planetary gearbox kit

  • Dernier stock ! Bulldog Sidewind Swivel Jack, 5K Trailer Jacks Nationwide Trailers Parts Store

    Bulldog Bulldog Sidewind Swivel Jack, 5K

    Bulldog's 5,000 lb. support capacity square jack dramatically improves side load strength while maintaining the economical benefits of lower capacity jacks. The extra side load strength while maintaining the economical benefits of lower capacity jacks. The extra side load capacity you need without the costs of increasing overall capacity. Details/Specs: Bracket height: 15-1/8" Retracted 30-1/8" Extended Lift: 15" Clearance: 9-1/4" from mounting bracket to top of jack Tubing width: 2-1/4" Pipe mount dimensions: 2" x 2" Handle radius: 6-1/2" Lift capacity: 3,000 lbs Static capacity: 5,000 lbs Weather-resistant coating on outer tube and zinc inner tube Manufacturer: BulldogPart No: 195362

    $189.99

  • Jack Handle Replacement, 7K Topwind Trailer Jacks Nationwide Trailers Parts Store

    Nationwide Trailers Parts Store Jack Handle Replacement, 7K Topwind

    Replacement jack handle for 7K topwind jacks.

    $12.99

  • Dernier stock ! Pro Series Sidewind Jack w/ Dropleg, 12K (Gooseneck, Side-pin) Trailer Jacks Nationwide Trailers Parts Store

    Nationwide Trailers Parts Store Ram Sidewind Jack w/ Dropleg, 12K (Gooseneck, Side-pin)

    This is a sidewind jack with drop leg for gooseneck trailers. Weld on application with black powder coat finish. Details/Specs: Lift Capacity: 10,000 lbs. Static Capacity: 12,000 lbs. Drop leg Travel: 12 1/2" Drop leg pull-pin to the side Adjustable drop leg with spring return and additional adjustment of 13-1/2" Crank handle not included

    $235.19

  • Dernier stock ! Bulldog Jack Topwind 7K 4 & 5" Channel Utility

    Bulldog Jack Topwind 7K 4 & 5" Channel Utility

    Bulldog Jack Topwind 7K 4 & 5" Channel Utility will work with both 4 & 5" with 4 hole.  These come unpainted

    $171.98

  • Dernier stock ! Jack Wheel Poly 1.2k

    Jack Wheel Poly 1.2k

    6" Plastic caster wheel, 1,200 lbs capacity

    $24.99

  • Dernier stock ! Jack, 7K Dropleg Square Topwind

    Jack, 7K Dropleg Square Topwind

    Jack, 7K Dropleg Square Topwind- Unpainted

    $165.99

Trailer Jacks

Crics et stabilisateurs de remorque fiables pour une utilisation intensive

Pour un levage sûr et efficace des remorques, il est essentiel de disposer d'un cric fiable capable de supporter le poids et les conditions d'utilisation fréquente. Nationwide Trailers propose une gamme diversifiée de crics et de stabilisateurs de remorque de haute qualité, conçus pour la résistance et la durabilité. Des crics manuels à vent supérieur et latéral aux crics hydrauliques et à béquilles robustes, notre collection propose les solutions de levage idéales pour différents types de remorques, notamment les remorques à col de cygne, à plateau et utilitaires.

Sélection complète de crics pour remorques

Que vous transportiez du matériel, des loisirs ou des marchandises, nos crics de remorque offrent la stabilité et la résistance dont vous avez besoin. Découvrez notre sélection, qui comprend :

  • Crics à vent supérieur et latéral : Ces crics à commande manuelle offrent un levage et une descente simples, disponibles dans différentes capacités de poids pour supporter des remorques légères et lourdes.
  • Crics hydrauliques : Les options hydrauliques offrent un fonctionnement fluide et facile, parfait pour les remorques lourdes nécessitant un levage rapide et efficace sans manivelle manuelle.
  • Crics à jambe tombante : Équipés d'une fonction de jambe tombante, ces crics offrent une extension et un soutien supplémentaires, idéaux pour stabiliser les remorques sur des surfaces inégales ou sous de lourdes charges.
  • Manivelles et rallonges : Des manivelles et rallonges de remplacement sont disponibles pour assurer un fonctionnement fluide et une compatibilité avec différents modèles de cric.
  • Blocs et bases stabilisateurs : Assurez la stabilité pendant le stationnement avec des bases durables et des blocs stabilisateurs qui empêchent l'enfoncement ou le déplacement sur un sol meuble ou irrégulier.

Pourquoi choisir Nationwide Trailers pour les crics de remorque ?

Chez Nationwide Trailers, nous accordons la priorité à la qualité et à la performance de chaque produit que nous proposons. Nos crics et stabilisateurs de remorque proviennent de fabricants de confiance, conçus pour répondre aux exigences d'une utilisation fréquente et de charges lourdes. Chaque cric de notre collection est rigoureusement testé pour garantir la sécurité, la résistance et la facilité d'utilisation, ce qui en fait un choix fiable pour les remorques professionnelles et récréatives.

Découvrez dès aujourd'hui notre collection de crics pour remorques afin de trouver la solution de levage adaptée à votre remorque. Pour obtenir de l'aide, contactez notre équipe compétente en ligne.

Recently viewed products

© 2024 Nationwide Trailer Parts, Commerce électronique propulsé par Shopify

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Meta Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Connexion

Vous avez oublié votre mot de passe ?

Vous n'avez pas encore de compte ?
Créer un compte