Matériel

Top keeper for cam door latch on PJ Trailers dump trailers. A- is top B- is Bottom

Lis Plus Moins

Lynch pin made of zinc dichromate plated steel.  Details/Specs: 3/16" 1-1/8 inch usable length 1-3/4" length 7/16" 1-19/32" usable length 2-1/4 length

Lis Plus Moins

Replacement dump trailer cam door latch kit used on PJ Trailer models D7, D9, DL, and DJ. Details/Specs: Construction: Steel  Color: No paint finish Handle is formed steel with a riveted swivel Handle Length: 13-1/2"  Kit contains: 180105 x 1 Keeper Bottom Cam Door Latch-Dump 180106 x 1 Keeper Top Cam Door Latch-Dump 180107 x 1 Lug Bottom Cam Door Latch-Dump 180108 x 1 Lug Top Cam Door Latch-Dump 180109 x 1 Handle Cam Door Latch-Dump 180110 x 1 Hasp Cam Door Latch-Dump Door

Lis Plus Moins

Greasable dump door hinge. Fits PJ Trailers D5-D9 models. Ships unpainted.  

Lis Plus Moins

Heavy duty cam lock handle hasp with rivet. 1-piece design. Details/Specs: Overall Length: 5-1/2" Mounting Hole Centers: 4-1/4" Width: 1"

Lis Plus Moins

Trailer floor screws used to secure wood deck boards to trailer frame. Counter sunk head for flush mount. Details/Specs:  1/4" diameter, 28 TPI 2 1/4" length Thread cutting tip, Type F Requires a 7/32" pre-drilled hole Black phosphate finish Sold in 1 lb. (~30 screws) & 4 lb. (~120 screws) boxes Note: Uses a T30 torx driver not included

Lis Plus Moins

Le Rampgate Keeper est une languette robuste conçue pour être soudée à l'arrière d'une remorque, offrant un point de montage sécurisé pour les axes de pivot sur les portes de remorque. Spécialement conçu pour s'adapter à une tige de 1", ce support assure la stabilité et la durabilité des portes et rampes de remorque. Il fait partie d'un kit de montage en quatre pièces, idéal pour améliorer la fonctionnalité et la sécurité de la remorque. Caractéristiques Convient aux tiges de 1" : Conçu pour être compatible avec les tiges de 1" de diamètre standard. Conception à souder durable : se soude facilement au cadre arrière de la remorque pour un maintien sûr. Plat 2"x 3/8" L x 2" L x 3/8" P

Lis Plus Moins

Standard use cotter pin. 1-1/2″ x 1/8″ for use on 7k axle. 2-1/2″ x 1/4″ for use on 10k axles.

Lis Plus Moins

This recessed bumper is used as feet on the bottom of products, on the side as protectors and on the top as absorbers. They are used to prevent metal-to-metal or surface-to-surface contact. Common uses include counter-top appliances, door stops, cart edges, furniture feet, drawer stops and thousands of places where they are installed with fasteners to protect metal and wood. Details/Specs: Outside Diameter: 2 1/2″ Height: 1″ Recess Depth: 1/2″ Recess Width: 1 1/8″ Hole Diameter: 3/8″

Lis Plus Moins

Lug nut for 5/8" stud. Details/Specs: 5/8" Diameter 18 Threads per inch 90 Degree cone taper Sold Individually 

Lis Plus Moins

Designed to hold doors open against the side of a body. The hook manually engages and disengages.

Lis Plus Moins

This multi-purpose yellow zinc plated snapper pin can secure most styles of coupler latches, ramps and gates. Details/Specs: 1/4″ x 2″ Pin Diameter: 1/4" Pin Length: 2" Usable Length: 1-13/16" Loop Clearance: 1-1/2" 1/4″ x 2-1/2″ Pin Diameter: 1/4" Pin Length: 2-1/2" Usable Length: 2-1/2" Loop Clearance: 1-3/4" 3/8" x 2-1/2" Pin Diameter: 3/8" Pin Length: 2-1/2" Usable Length: 2-3/8" Loop Clearance: 1-1/2" Manufacturer: BuyersPart No: 66050 (1/4″ x 2″), 66063 (1/4″ x 2-1/2″), 66060 (3/8" x 2-1/2")

Lis Plus Moins

Bullet/barrel hinge with grease fitting. Available in 4-1/2" and 6" in length. Actual product fabrication may vary slightly from photo.

Lis Plus Moins

Heavy duty cam lock handle hasp without rivet. 2-piece design. Details/Specs: Overall Length: 5" Mounting Hole Centers: 4" Width: 2"

Lis Plus Moins

3/4″ coarse-thread bolt holds tension between the coupler outer housing and coupler insert of the gooseneck coupler. Fits either round or square couplers. Includes jam nut.

Lis Plus Moins

Weld on replacement for worn or cracked stake pockets. Details/Specs: Standard 2" x 4" stake pocket Unpainted

Lis Plus Moins

Grade 2, zinc plated Hexagonal nut - 7/16"-20.

Lis Plus Moins

16″ Strap hinge for trailer and RV doors. Sharply bent hinge pivot point for extra 5/16″ corner clearance and 1/2″ offset gap for thick door seals. 270° action when placed on trailer corner. Strap mounting holes on 6.50″ CentersHinge mounting holes on 3.25″ Centers

Lis Plus Moins

For use with most stud-mounted tail lights and stop, turn, tail with license light. Zinc-plated steel. Hardware not included. Manufacturer: PetersonPart No: B428-09

Lis Plus Moins

Premium-grade quick links for chain, rope & cable connections; threaded nut closure for added security. Grade 316 stainless steel has superior corrosion resistance and strength over grade 304. Excellent choice for boating, sailing, marine and other harsh-condition applications.

Lis Plus Moins

Half pivot hinge for Lonestar full tilt trailers Includes grease fitting Pin is welded in Sold unpainted, This may have some surface rust  Dimensions 5" x 4" x 4.5"

Lis Plus Moins

Made from steel grating for increased traction 12.5" wide allowing both feet to be on the step at once for improved stability & safety Excellent grip in mud & snow Self-cleaning

Lis Plus Moins

Pin Diameter: 5/8 in. Usable Length: 3 in. Includes Straight R-type Clip

Lis Plus Moins