Essieu Dexter

70 produits

  • Sale -11% DEXTER Brake Rotor Mounting Stud & Nut

    Dexter Axle DEXTER Brake Rotor Mounting Stud & Nut

      Dexter brake rotor stud and nut includes (1) studs and (1) nuts. 1/2" - 13 UNC hub thread, 1/2" - 20 UNF nut thread. 10k HD dexter  12k Dexter 

    $7.00 $6.25

  • Dexter Electric Trailer Brake Assembly - 12-1/4" x 2-1/2"

    Dexter Axle Dexter Electric Trailer Brake Assembly - 12-1/4" x 2-1/2"

    12-1/4" x 2-1/2" Passenger's-side electric trailer brake assembly fits 8K axles. Mounting flange has 4-bolt pattern Application: most standard hub-and-drum assemblies, including Dexter and Lippert (LCI) Configuration: left hand (driver's side) Dimensions: 12-1/4" diameter x 2-1/2" wide Mounting flange bolt pattern: 4 bolt Axle rating: 8K

  • Sale -33% Dexter Electric/Hydraulic Brake Actuator, 1000 PSI Hydraulics (FS) Nationwide Trailers Parts Store

    Dexter Axle Dexter Electric/Hydraulic Brake Actuator, 1000 PSI

    Electro/Hydraulic brake actuator provides 1000 psi of pressure for 1-3 axles equipped with drum brakes. Sealed housing provides a weather tight seal. Large reservoir capacity reduces the number of fill-ups required which reduces the bleed time as well as the risk of running the reservoir dry during brake bleeding. Aluminum enclosure provides anti-corrosive protection and prevents the elements from affecting reliability while the finned housing design dissipates heat efficiently. Proportional pressure output to the brakes corresponds to voltage output of the brake controller for smooth, reliable braking. Details/Specs: Provides 1000 PSI of pressure For single, tandem, and triple axle trailers with drum brakes Dimensions: 10.5" L x 5.5" W x 7" H 12V DC operation requires 4-wire hookup & at least 9 amp break-away kit Uses DOT 3 or 4 brake fluid, holds 40 cubic inches (0.7 qts) Meets or exceeds all DOT regulations and federal braking requirements Manufacturer: DexterPart No: K71-650-00

    $1,456.99 $969.99

  • Sale -35% Dexter Electric/Hydraulic Brake Actuator, 1600 PSI Hydraulics (FS) Nationwide Trailers Parts Store

    Dexter Axle Dexter Electric/Hydraulic Brake Actuator, 1600 PSI

    Electro/Hydraulic brake actuator provides 1600 psi of pressure for 1-3 axles equipped with disc brakes. Sealed housing provides a weather tight seal. Large reservoir capacity reduces the number of fill-ups required which reduces the bleed time as well as the risk of running the reservoir dry during brake bleeding. Aluminum enclosure provides anti-corrosive protection and prevents the elements from affecting reliability while the finned housing design dissipates heat efficiently. Proportional pressure output to the brakes corresponds to voltage output of the brake controller for smooth, reliable braking. Details/Specs: Provides 1600 PSI of pressure For single, tandem, and triple axle trailers with disc brakes Dimensions: 10.5" L x 5.5" W x 7" H Distance between mounting holes (center to center): 2-1/2" Between holes on same side of bracket 9-13/16" Between holes on opposite sides of bracket Mounting hole diameter: 1/4" Hydraulic port size: 3/16" 12V DC operation requires 4-wire hookup & at least 9 amp break-away kit Uses DOT 3 or 4 brake fluid, holds 40 cubic inches (0.7 qts) Meets or exceeds all DOT regulations and federal braking requirements Manufacturer: DexterPart No: K71-651-00

    $1,459.99 $945.99

  • Dernier stock ! Dexter Equalizer for 3" Wide Slipper Springs 24-3/4"

    Dexter Axle Dexter Equalizer for 3" Wide Slipper Springs 24-3/4"

    Slipper Springs - 3 Inch 24-3/4 Inch Long Tandem Axle Dexter Axle Equalizer attaches to the middle hanger of you suspension system and connects slipper springs on your tandem or triple-axle trailer. Fits 3" wide springs with 1" diameter eye. Connects slipper springs on dual- or triple-axle trailers Slip arched end of front spring into equalizer so that it rests on keeper bolt (sold separately) Attach rear-most spring with shackle bolt (sold separately) through the eye Suspends from center hanger (sold separately) Transfers load and sudden impacts from one axle to another by permitting movement between the axles Distributes weight evenly Results in smooth ride for trailer Rubber bushing are pressed into center holes allowing less noise and vibration into suspension Strong steel construction ensures durability Specs: Fits: tandem- or triple-axle trailer with 3" wide slipper springs

    $275.99

  • Bleeder Screw, 10K - 12K Dexter Brakes (FS) Nationwide Trailers Parts Store

    Dexter Axle Dexter Genuine Brake Caliper Bleeder Screw, 10K-12K (054-069-00)

    Ensure your trailer's braking system operates flawlessly with the Dexter Brake Caliper Bleeder Screw, designed for 10K and 12K axles. This essential component fits both left and right calipers, making brake fluid servicing simple and efficient. With corrosion-resistant construction, it’s built to withstand harsh environments and ensure long-lasting performance. Features Universal Fit: Compatible with both left and right calipers on Dexter 10K-12K axle setups. Corrosion Resistant: Made to endure tough conditions and prevent rust. Easy Installation: 7/16” wrench size and 1-5/16” length for quick, hassle-free setup. Why Choose This Part? Reliable Dexter Quality: Crafted to meet high industry standards. Optimized Maintenance: Facilitates efficient brake fluid bleeding, keeping your system in top condition. Dexter Part No: 054-069-00 

    $5.49

  • Sale -3% Genuine Dexter Hydraulic Disc Brake Caliper for 10K-12K Axles (089-002-02) Genuine Dexter Hydraulic Disc Brake Caliper for 10K-12K Axles (089-002-02)

    Dexter Axle Étrier de frein à disque hydraulique d'origine Dexter pour essieux 10K-12K (089-002-02)

    Cet étrier de frein à disque hydraulique Dexter est conçu pour les essieux droits de 10 000 à 12 000 lb, offrant des performances de freinage puissantes et constantes. Idéal pour les applications de remorques lourdes, cet étrier est conçu pour être utilisé avec le kit de plaquettes de frein K71-180-00 et nécessite un orifice de purge 1/4"-28 (vendu séparément). Fabriqué selon les normes élevées de Dexter, cet étrier garantit une puissance de freinage fiable pour les charges exigeantes. Caractéristiques Compatibilité robuste : convient aux essieux droits Dexter 10K-12K. Qualité Dexter durable : Conçu pour gérer des conditions rigoureuses et une utilisation prolongée. Remarque : À utiliser avec le kit de plaquettes de frein K71-180-00 . Nécessite un orifice de purge 1/4"-28 054-069-00 (vendu séparément) Numéro de pièce Dexter : 089-002-02

    $465.23 $450.99

  • Sale -9%Dernier stock ! Dexter magnet kit 8K

    Dexter Axle Dexter magnet kit 8K

    Compatibility : Dexter 12-1/4 Inch Diameter X 2-1/2 Inch Width 8000 Pound Capacity Electric Brake

    $120.99 $109.99

  • Dernier stock ! Dexter Nev-R-Adjust Electric Trailer Brake Assembly 7K

    Dexter Axle Dexter Nev-R-Adjust Electric Trailer Brake Assembly 7K

    12" x 2" Driver's-side electric trailer brake assembly fits 7,000-lb axles. Mounting flange has a 5-bolt pattern. Nev-R-Adjust brakes require little maintenance.  Electric brakes are easier to install and offer more user control than hydraulic brakes Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines necessary Nev-R-Adjust brakes automatically adjust to deliver optimum performance and braking power No need for manual brake adjustments Proper adjustment leads to better brake efficiency and less wear on your tow vehicle's brakes Adjuster plugs (included) cover access holes to keep dirt and grime out of the assemblies and off of the shoes Mounting bolts sold separately Made in the USA

  • Dexter Spring Bushing (Rubber) 10K GD

    Dexter Axle Dexter Spring Bushing (Rubber) 10K GD

    Rubber bushing for Dexter 10K general duty 2.5" wide springs.

    $39.99

  • 9/16" Replacement Studs for Dexter® 7,000 lbs. and 8,000 lbs. Drums 9/16" Replacement Studs for Dexter® 7,000 lbs. and 8,000 lbs. Drums

    Dexter Axle Dexter Stud Bolt Press-In 9/16" x 2.5" for 7k/8K Drums (007-132-00)

    9/16" Replacement Studs for Dexter® 7,000 lbs. and 8,000 lbs. DrumsBolt Press-In 9/16-18 X 2.30 Zinc – Wheel Stud Stud Length – 2.30″ Thread Length – 1.23″ Spline Length – 0.81″ Base Length – 0.28″ Thread Diameter – 9/16″ Spline Diameter – 0.69″ Manufacturer: DexterPart: 007-132-00

    $3.99

  • Sale -5% Disc Brake Pad Kit, Dexter (6K-8K)

    Dexter Axle Disc Brake Pad Kit, Dexter (6K-8K)

    Semi-metallic brake pads replace the pads on 2 of your 6K, 7K, or 8K Dexter disc brake assemblies. Durable semi-metallic construction provides long-lasting stopping power. Includes 4 brake pads and mounting hardware for use on 1 axle. Details/Specs: Kit includes: (2) Cotter Pin (019-019-00) (2) Retaining Pin (056-038-00) (4) Brake Pad (091-004-00) (2) Anti-rattle Spring (1) Instruction Sheet (059-798-00) Manufacturer: Dexter AxlePart No: K71-629-00  

    $245.99 $232.99

  • Sale -36% Drum 9K/10K GD DX New Style Axle Components Nationwide Trailers Parts Store

    Dexter Axle Drum 9K 10K GD Dexter

    This brake drum was put into service in May of 2013 to supercede Dexter one-piece hub and drum combinations 008-415-02 and 008-415-04. The one-piece hub and drum combinations went into service after July of 2009, and they're no longer available. You will have to switch over to the new two-piece hub and drum design.

    $723.99 $459.99

  • Sale -16% Drum Mounting Bolt 10HD-15K

    Dexter Axle Drum Mounting Bolt 10HD-15K

    Dexter Drum/Hub mounting bolt. Used to attach 10HD, 12k, and 15K hubs and drums together. 1-3/4" Long x 1/2" -13 UNC. Dexter #k71-354-00 Dexter Axle

    $3.80 $3.18

  • Sale -70% Drum Mounting Bolt 9k-10k GD 1.5"

    Dexter Axle Drum Mounting Bolt 9k-10k GD 1.5"

      Dexter K71-355-00 Drum Mounting Screws fit  9K and 10K Dexter GD drums. 1-1/2" Long x 1/2" - 13 UNC. Brand  Dexter Axle Manufacturer Part Number  K71-355-00

    $7.89 $2.35

  • Sale -22% Drum, 12K-15K, Dexter Axle Components Nationwide Trailers Parts Store

    Dexter Axle Drum, 12K-15K, Dexter

    Dexter trailer brake drum for 12K-15K oil bath axles with 8 on 6 1/2" bolt pattern. Details/Specs: Pilot Hole: 5-1/4" Capacity: 7,500 lbs Bolt Pattern: 8 on 6.5" Use with Dexter 12-1/4" x 5" brakes (not included) Use with mounting bolts 7-244 (not included) 12k Dexter 15k Dexter Manufacturer: DexterPart No: 009-028-01

    $539.99 $420.00

  • Drum, 9K-10K GD, 2-piece Old Style, Dexter Axle Components Nationwide Trailers Parts Store

    Dexter Axle Drum, 9K-10K GD, 2-piece Old Style, Dexter

    Dexter trailer brake drum for 9K-10K General Duty oil bath axles with 8 on 6-1/2" bolt pattern and #99 spindle. Details/Specs: Adds or replaces a non-ABS brake drum for Dexter "old-style," 2-piece hub and drum Pilot Hole: 4 3/4" Capacity: 5,000 lbs Bolt Pattern: 8 on 6.5" Use with Dexter hub 008-288-03  (not included) Use with mounting bolts 7-103 (not included) Use with Dexter 12-1/4" x 3-3/8" brakes (not included) Manufacturer: DexterPart No: 009-044-01

    $422.99

  • Electric Brake Assembly 10" x 2.25" - 3.5K (Dexter) Brakes Nationwide Trailers Parts Store Electric Brake Assembly 10" x 2.25" - 3.5K (Dexter) Brakes Nationwide Trailers Parts Store

    Dexter Axle Electric Brake Assembly 10" x 2.25" - 3.5K (Dexter)

    Complete Brake Assembly - 10" x 2 1/4" Electric 3.5K Brake Assembly - Dexter Note: Specify left or right side assembly. #K23-026-00 Is LH #K23-027-00 is RH

  • Sale -16% Electric Brake Assembly 12" x 2" - 5.2K-7K (Tru Ryde) Brakes Nationwide Trailers Parts Store

    Dexter Axle Electric Brake Assembly 12" x 2" - 5.2K-7K

    Complete Brake Assembly - 12" x 2" Electric 5.2K-7K Brake Assembly  Fits Dexter, ALKO and Quality Running Gear axles Note: Specify left or right side assembly.  

    $104.56 $87.99

  • Sale -38% Electric Brake Assembly 12" x 2" - 7K (Dexter) Brakes Nationwide Trailers Parts Store Electric Brake Assembly 12" x 2" - 7K (Dexter) Brakes Nationwide Trailers Parts Store

    Dexter Axle Electric Brake Assembly 12" x 2" - 7K (Dexter)

    Complete Brake Assembly - 12" x 2" Electric 7K Brake Assembly - Dexter Specify Left (K23-180-00) or Right (K23-181-00) Mounts to 5-hole axle brake flange. Note: Specify left or right side assembly.

    $154.99 $96.56

  • Electric Brake Assembly, FSA 12.25" x 3.375" - 8K (Dexter) Brakes Nationwide Trailers Parts Store Electric Brake Assembly, FSA 12.25" x 3.375" - 8K (Dexter) Brakes Nationwide Trailers Parts Store

    Dexter Axle Electric Brake Assembly, FSA 12.25" x 3.375" - 8K (Dexter)

    Complete Brake Assembly - 12 1/4" x 3 3/8" Electric 8K FSA Brake Assembly - Dexter Note: Specify left or right side assembly.

  • Electric Brake Assembly, FSA 12.25" x 3.375" - 9K-10K (Dexter) Brakes Nationwide Trailers Parts Store Electric Brake Assembly, FSA 12.25" x 3.375" - 9K-10K (Dexter) Brakes Nationwide Trailers Parts Store

    Dexter Axle Electric Brake Assembly, FSA 12.25" x 3.375" - 9K-10K (Dexter)

    Complete Brake Assembly - 12 1/4" x 3 3/8" Electric 9-10K GD FSA Brake Assembly - Dexter Note: Specify left or right side assembly.

  • Electric Brake Assembly, FSA 12.25" x 4" - 10K HD (Dexter) Brakes Nationwide Trailers Parts Store Electric Brake Assembly, FSA 12.25" x 4" - 10K HD (Dexter) Brakes Nationwide Trailers Parts Store

    Dexter Axle Electric Brake Assembly, FSA 12.25" x 4" - 10K HD (Dexter)

    Complete Brake Assembly - 12 1/4" x 4" Electric 10K HD FSA Brake Assembly - Dexter Note: Specify left or right side assembly.

  • Electric Brake Assembly, FSA 12.25" x 5" - 12K (Dexter) Brakes Nationwide Trailers Parts Store Electric Brake Assembly, FSA 12.25" x 5" - 12K (Dexter) Brakes Nationwide Trailers Parts Store

    Dexter Axle Electric Brake Assembly, FSA 12.25" x 5" - 12K (Dexter)

    Complete Brake Assembly - 12 1/4" x 5" Electric 12K FSA Brake Assembly - Dexter Note: Specify left or right side assembly.


I18n Error: Missing interpolation value "number1" for "Vous avez vu {{ number1 }} produits sur {{ number2 }}"

Dexter Axles

Essieux Dexter : essieux et composants de remorque fiables

Dexter est un leader de confiance dans le domaine des essieux et des composants d'essieux pour remorques, reconnu pour leur résistance, leur fiabilité et leur ingénierie de haute performance. Nationwide Trailers propose une sélection complète d'essieux Dexter et de composants connexes conçus pour assurer un remorquage stable et fluide sur différents types de remorques, notamment les remorques utilitaires, à plateau et à col de cygne. Qu'il s'agisse d'applications lourdes ou d'une utilisation générale, les essieux Dexter garantissent que votre remorque peut supporter des charges exigeantes et des conditions difficiles.

Sélection complète d'essieux et de composants pour remorques Dexter

Notre collection d'essieux Dexter comprend une variété de types d'essieux et de composants essentiels, chacun conçu pour la durabilité et la performance. Découvrez notre sélection de :

  • Essieux droits et abaissés : les essieux droits et abaissés de Dexter sont conçus pour supporter des charges importantes, offrant une répartition du poids et une stabilité sûres. Choisissez parmi différentes capacités de poids pour répondre aux exigences de votre remorque.
  • Essieux à freins électriques : ces essieux Dexter sont équipés de freins électriques intégrés, améliorant la puissance de freinage de votre remorque pour plus de sécurité sur la route. Disponibles en plusieurs capacités, ils sont idéaux pour les remorques qui ont besoin d'un support de freinage fiable.
  • Kits moyeu et tambour : Les kits moyeu et tambour Dexter sont conçus pour des performances fluides, compatibles avec les systèmes de freinage électriques ou hydrauliques pour fournir une puissance de freinage constante et une durabilité à long terme.
  • Accessoires d'essieu : Gardez votre essieu Dexter en parfait état grâce à notre sélection d'accessoires, notamment des sièges à ressort, des boulons en U et du matériel de montage pour une fixation et une stabilité sûres.

Pourquoi choisir les essieux Dexter pour votre remorque ?

Les essieux Dexter sont réputés pour leur conception robuste, leurs matériaux résistants à la corrosion et leur ingénierie de précision, ce qui en fait un choix de premier ordre pour les propriétaires de remorques à la recherche de performances fiables. Conçus pour gérer les terrains accidentés et les charges lourdes, les essieux Dexter offrent stabilité et contrôle pour assurer la sécurité de votre remorque sur n'importe quelle route. Avec Nationwide Trailers, vous avez accès à la gamme complète d'essieux et d'accessoires Dexter, avec une commande en ligne sécurisée et une livraison rapide.

Parcourez dès aujourd'hui notre collection d'essieux Dexter pour améliorer les performances de votre remorque avec des solutions d'essieux fiables. Pour obtenir de l'aide, contactez notre équipe compétente en ligne : nous sommes là pour vous aider !

Recently viewed products

© 2024 Nationwide Trailer Parts, Commerce électronique propulsé par Shopify

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Meta Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Connexion

Vous avez oublié votre mot de passe ?

Vous n'avez pas encore de compte ?
Créer un compte